Installing Apache on Windows

This article was published by, , as a feature tutorial.

Even though it is possible to do Web development and testing on a remote server, it is better to fully develop a new website on a local Web server, and then upload everything when it is finished, for many reasons: 1) Keeping the unfinished site off the Internet is safer, because as you begin developing the site, you probably have not put in all of your code for neutralizing any potential attacks against your site, including cross-site scripting (XSS) vulnerabilities. 2) You may already have sensitive data in the database for testing. 3) When you want to make future modifications to a site that is already live (i.e., on the Internet and available to the public), it is better to make changes (and mistakes!) on your PC, where they will be seen only by you. You don't want to risk disrupting the functioning of your production server. 4) If you prefer to work mobile, you can modify your site even without being connected to the Internet. 5) You can see those modifications without wasting time FTP-ing files up to the remote server.

Programmers new to Web development have likely heard of Web servers, but may not be completely sure as to what they are. The term "Web server" has two, albeit related, meanings: It refers to any computer program that receives HTTP requests from client programs — usually Web browsers running on remote computers — and responds to those requests by serving up data — usually Web pages and their elements. The term also refers to the computer running such a server program.

The two most commonly used Web servers in the world are Apache, offered by The Apache Software Foundation, and Internet Information Services (IIS), offered by Microsoft. Because this tutorial assumes that you are using Microsoft Windows, you have the option to use either Web server. I heartily recommend Apache, and that is what I will focus on here. IIS is built into Windows, and some developers may consider that reason enough to eschew IIS.

Regardless, Apache has some appreciable advantages: As the most popular choice, there are greater chances of finding information on it, and assistance from other programmers. Apache is free and open source, hence the code has received much greater scrutiny than proprietary alternatives, and thus probably has fewer bugs and, more importantly, security holes. Also, Apache runs on operating systems other than Windows, including Linux and Mac OS. If you are using Mac OS X, then Apache is already installed, but needs to be activated (System Preferences > Sharing > Personal Web Sharing).

For this tutorial, I will be using the most recent stable version of Apache, which as of this writing is version 2.2.8. In addition, I will be using Windows XP Service Pack 2. If you are using a different version of Windows, it is quite possible that the menu options that you will need to follow will be slightly different, and the dialog boxes and other screens will appear different from the figures in this tutorial. However, the equivalents for your own version of Windows should be easy to discern.

Apache Already Installed?

Before you start installing a brand new instance of Apache on your development machine, you should first determine whether or not you already have an earlier version of Apache installed, and if so, what to do about it. First, check what Windows services are installed and possibly running on your PC. Go to Start > Settings > Control Panel > Administrative Tools > Services, then click the Standard tab.

Windows services
Figure 1. Windows services

The third entry in the list shows that Apache 1.3.33 is currently running, with the status of "Started". You should stop the service manually, because uninstalling Apache is not sufficient to stop the service — at least for version 1.3.x. To stop the Apache service, right-click on the line, and in the context menu that pops up, choose "Stop". A dialog box will show the progress of Windows shutting down Apache.

Stopping Apache
Figure 2. Stopping Apache

If Apache is not listed in the Windows services, it may nonetheless be installed on your PC, but configured to only be run manually, and not registered as a service. Either way, you should next try to find any Apache installation, by looking in all directories where you have installed applications in the past. C:\Program Files\ is the default installation directory. It is possible that you have more than one version of Apache installed, probably in separate directories whose names contain the version numbers.

In this example, I will assume that only a single instance of Apache, version 1.3.3, has previously been installed. To uninstall it, go to Start > Settings > Control Panel > Add or Remove Programs. Click on the Apache entry in the list, and then click the "Remove" button.

Removing Apache
Figure 3. Removing Apache

Even after uninstalling Apache, there may be many files left behind, in three directories: conf, htdocs, and logs. To do a clean install, delete these leftover files and directories. But first save any configuration files that might be valuable to you in the future, such as conf\httpd.conf and htdocs\phpMyAdmin\

Reboot your PC, and check the Windows services again. Usually uninstalling an application is sufficient to remove it from the services list. But if Apache is still listed, you can remove it by editing your Windows Registry. On the command line, run either "Regedit" or "regedt32". Make a backup of your Registry. Find and delete the Registry key HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Apache. Reboot again, to fully update the services list.

Downloading Apache

To get the latest version of Apache (2.2.8 as of this writing), go to the Apache download page.

Download page
Figure 4. Download page

In the "Apache HTTP Server 2.2.8" section of the page, click on the link for "Win32 Binary without crypto", which begins downloading the file apache_2.2.8-win32-x86-no_ssl.msi.

Download section
Figure 5. Download section

To the right of the filename are links for obtaining the PGP and MD5 signatures, if you want to confirm the integrity of the file after you have downloaded it to your PC. The other two Win32 links would be used if you wanted to download the Apache source code, or to use OpenSSL. Those topics are not covered in this tutorial.

Installing Apache

Find the installation file, apache_2.2.8-win32-x86-no_ssl.msi, wherever you saved it on your PC. Open the file, which starts the installation process, using the Windows MSI Installer.

Installing Apache - welcome
Figure 6. Installing Apache - welcome

At the welcome dialog box, click the "Next" button.

Installing Apache - license
Figure 7. Installing Apache - license

At the license dialog box, check the radio button to indicate that you accept the license, and click the "Next" button.

Installing Apache - read this first
Figure 8. Installing Apache - read this first

The "Read This First" dialog box contains information that may be of interest to new users, but does not need to be read for the installation. Click the "Next" button.

Installing Apache - server information default
Figure 9. Installing Apache - server information default

In the server information dialog box, Apache has set the initial domain name ("Network Domain") to "domain_not_set.invalid", as a clear indication to you that the value needs to be replaced with something valid. For the local Web server that you are setting up, the correct value is "localhost". The "Server Name" value can be set to any string. The administration email address is typically set to "root@localhost". It is recommended that you install Apache for all Windows users, on port 80, as a service.

Installing Apache - server information new
Figure 10. Installing Apache - server information new

Once you have confirmed that all three new values you typed in are correct, click the "Next" button.

Installing Apache - setup type
Figure 11. Installing Apache - setup type

The Apache installation will contain components that are optional, such as the documentation and the taskbar icon. For most users, the typical setup will be fine. But if you wish to save some disk space by excluding the documentation from the installation, or do not want another icon in your Windows taskbar, choose the "Custom" setup option, which I will do here.

Installing Apache - custom setup
Figure 12. Installing Apache - custom setup

By default, Apache will be installed in C:\Program Files\Apache Software Foundation\Apache2.2\. Either setup option allows you to change the destination folder. But if the install wizard detects a previous Apache instance, it will not display the destination folder, nor the button to change it. In that case, click the "Next" button and on the resultant dialog box click the "Previous" button, returning you to the "Custom Setup" dialog box. You should then see the destination folder and "Change" button. After you have made all of your choices, click the "Next" button.

Installing Apache - ready to install
Figure 13. Installing Apache - ready to install

You are now ready to install Apache's files. Click the "Install" button.

Installing Apache - installing
Figure 14. Installing Apache - installing

The installation process contains many steps, and you will see several DOS boxes pop up and then disappear, as Apache performs various operations on individual command lines. When the installation wizard has completed, it will display a final dialog box.

Installing Apache - completed
Figure 15. Installing Apache - completed

Click the "Finish" button. You are now ready to verify that the installation was successful.

Testing Apache

In a Web browser, go to the address "http://localhost". You will recognize localhost as the server name specified earlier. This URL may look strange, but it is valid. If the installation was successful, the Web page displayed simply reads "It works!"

Test page
Figure 16. Test page

If your results differ, first check for any errors. All of the errors and warnings detected by Apache are recorded in its log file, logs\error.log.

If you are interested in verifying some of the additional changes made to your system, you can start by examining the top-level Apache directories and files, in your favorite file browser. The modification and creation dates that you will see will differ from those shown in the screenshot below.

Apache directories and files
Figure 17. Apache directories and files

The installation process should have added a new menu group to your Start menu.

Menu items
Figure 18. Menu items

Configuring Apache

Apache's configuration files are stored in its "conf" directory, and httpd.conf is the primary configuration file. This is where you will make most if not all of your customizations to Apache's configuration. For instance, if you plan on using RewriteRule commands in any.htaccess files, then in your httpd.conf file, in the LoadModule section, uncomment the command "LoadModule rewrite_module modules/".

To activate any configuration change, restart Apache. Then check the aforesaid log file for any errors or warnings.

Directory access is initially set to be extremely restrictive. Consequently, if you use the default configuration and try to have Apache serve a local Web page outside of its default DocumentRoot (C:\Program Files\Apache\htdocs), then it will give you an error message that you do not have permission to access the file. To resolve this, find the "<Directory />" section in httpd.conf, and change "AllowOverride None" to "AllowOverride All", and "Deny from all" to "Allow from all".

I recommend that you use comments to document, for your future reference, any changes that you make within httpd.conf. Also, make and verify each configuration change individually, thereby making it much easier to determine which change may be causing a problem. Lastly, new entries can usually be grouped at the bottom of the file. Continuing the example of using the HTTP rewrite module, to specify the rewrite log file and log level, you could add the following two commands at the bottom of httpd.conf:

RewriteLog rewritelog.txt
RewriteLogLevel 3

If you use Firefox as your Web browser, then you may notice that every time you start Firefox, Apache reports an error, in triplicate, that it cannot find htdocs/favicon.ico. To resolve this problem, if you chose to install the Apache manual, then simply copy the file manual\images\favicon.ico into the htdocs directory. Or simply create an empty file htdocs/favicon.ico (the command "echo. > favicon.ico" will suffice).

More Resources

If you need further information on the Apache Web server, there are several resources available. The version 2.2 documentation is online. Helpful websites include Apache Lounge and's Apache DevCenter.

To post questions to other programmers, you can subscribe to the official mailing list.

O'Reilly Media currently publishes eight books dedicated to Apache.

Once you have Apache installed and configured on your local development PC, it will undoubtedly become an essential part of your Web programming environment.

Copyright © 2008 Michael J. Ross. All rights reserved.
bad bots block